This custom carbon sportboat is currently under construction in Rhode Island.  She is largely being homebuilt.  Her builders formerly owned a Kiwi 35, which was unfortunately struck by another boat in a storm and lost during Key West. Race Week.  Rodger Martin Design had been involved for about 5 years helping optimize the dated Kiwi into a performance-oriented successful raceboat, work including replacing the old spar with a carbon  Mumm 30 rig,  replacing symmetric spinnaker with asymmetric, and aluminum hiking racks (weight savings of approx. 400#).  She was lost just as her speed was peaking - but fortunately the rig, hardware, some sails, and lead ballast were salvaged. 

PERFORMANCE

The boat has been optimized to perform with a full crew of 8-9 sitting out on the carbon hiking racks.  A 14' beam (with racks) provides plenty of stability - necessary to keep the boat on its feet under the large sailplan!  With the racks removed she has an 8.5' beam, for easy trailerability.  A lifting keel will allow for shallow water launching and easier transport as well.  

The skiff hull shape reflects a fine entry with generous planing area aft.  A hard chine helps enable sweet planing shapes, and provides tracking and secondary stability.  We have studied, as we typically do, heeled hull shapes and designed the chine accordingly.   Upwind she should settle into a nice groove and easily punch through waves; off the wind in breeze, with the crew piled up aft on the racks, we don't expect to see much of the boat in the water! 

CONSTRUCTION